Loading... Please wait...

Hover over image to zoom

  • TITAN tricopter frame shown with optional carbon fiber booms
  • TITAN tricopter frame shown with optional carbon fiber booms and camera mount. Electronics and camera not included.
  • TITAN tricopter frame shown with optional carbon fiber booms and camera mount. Electronics and camera not included.
  • TITAN tricopter frame shown with optional carbon fiber booms
  • Image 5
  • Parts are shipped hot off the laser cutter- you will need to remove the masking tape and clean the parts before use
  • Motor mount is attached with two cable-ties. In a crash the cable ties will break to help prevent damage to the frame and motors
  • Motor mounts will accept up to 35mm diameter motors with 16mm, 19mm, or 25mm screw patterns. Motors not included.
  • Optional vibration isolated camera mount
  • TITAN tricopter frame shown with optional carbon fiber booms. Electronics not included.
  • TITAN tricopter frame shown with optional carbon fiber booms and camera mount. Electronics and camera not included.
  • Arms fold for easy transport and storage. Electronics not included.
  • TITAN tricopter frame shown with optional carbon fiber booms
  • Lower frame plate has slots for a 1" wide battery strap, plus mounting holes for the optional camera platform.
  • Two piece landing gear is stiff, but will break away in a crash to prevent damage
  • Yaw mechanism is modular and able to break free in a crash to prevent damage.
  • Full 90deg rotation gives you amazing yaw authority with zero slop.

TITAN Tricopter Frame Kit

$79.95

 Product Description

Electronics not included- assembly required.

The TITAN- Hands down the toughest full-size tricopter frame ever!

Tired of breaking the bank every time you crash? Or maybe you’re just getting into the hobby and you need something sturdy to learn with… look no further. The TITAN was designed from scratch to take a beating. The average crash with a TITAN will only cost you a prop or two and a handful of cable-ties!

Why is the TITAN the toughest?

  1. All three booms can fold in a crash. The unique arm retainers keep all three booms securely in place while in flight- but pop loose in a crash to prevent damage. The TITAN is also the only tricopter with a free-folding tail boom; which can save it from breaking in a tail-in crash.
  2. Break-away components. The motor mounts, landing gear and yaw mechanism are all held in place by standard mini cable-ties. In a crash, the cable-ties break and save the components from damage. Replacing them is a quick and costs pennies!
  3. Carbon fiber booms (optional). 10mm square pultruded carbon fiber rod. You can also use these instructions to convert them to Wood/Carbon Hybrid booms which will make them nearly indestructible!
  4. Modular yaw mechanism. The yaw mechanism is an independent module that is also affixed by cable-ties, in a hard enough crash it will break free to prevent serious damage. (details)
  5. Engineering grade materials. The main components of the TITAN are made from 1/8” thick laser cut delrin- much stronger than injection molded plastics yet more flexible than aluminum or carbon fiber. Delrin is the go-to material for engineers who are serious about strength, durability and weight.

Additional features:

  • The lower frame plate has screw holes that accept an optional vibration-isolated camera platform
  • Arms fold back for compact storage and transport
  • Specially designed “fingers” prevent the rubber arm retainers from being lost when they pop loose in a crash
  • Two piece landing gear is extra stiff to prevent yaw oscillation on the ground
  • An engraved outline for 50mm square flight controllers such as the KK2 or MultiWii helps you position the FC right on the center of gravity
  • The electronics cover protects your electronics in the event of an inverted crash- and customizable colors improve the look of your rig!
  • There is ample room between the frame plates for wiring, plus there are cable-tie slots to keep everything tidy
  • All hardware is high quality 18-8 stainless steel, with the exception of the electronics cover standoffs which are lightweight aluminum
  • 8" minimum, 11" maximum prop diameter recommended

The TITAN is tough, but not indestructible. That’s why a full range of replacement parts are available to get you flying again ASAP!

Electronics not included- assembly required.

Included in the TITAN Tri Frame Kit:

  • Delrin frame plates
  • 3 Delrin motor mounts for motors with 16mm, 19mm, or 25mm bolt patterns (details)
  • Clear laser-engraved acrylic electronics cover
  • 3 piece set of delrin landing gear
  • TITAN Yaw Mechanism (details)
  • All necessary hardware
  • Laser-cut silicone motor and yaw mech pads
  • 3 rubber arm retainers and 3 spares

Options:

  • Electronics cover colors: 5 transparent acrylic color choices or black delrin. Delrin is much more impact resistant than acrylic.
  • Vibration isolated camera mount: Just four screws allow you to make your crazy aerobatic flier into a stable camera platform!
    • Small Camera Mount: perfect for mounting cameras like the GoPro Hero2, Hero3, Hero3+, Mobius Acton Cam, or our FPV Board Camera Mount.
    • Large Camera Mount: (Only recommended for small point-and-shoot cameras when mounted on a tricopter frame, if you want to lift larger cameras you should consider the TITAN Y6 frame). Allows you to mount nearly any camera with a 1/4-20 mounting point. It features an offset FPV camera platform compatible with our FPV Board Camera Mount (sold separately) which allows you to perfectly line up your shots, and the extended length battery tray allows you to balance your copter no matter the payload.
  • Booms:
    • 16” Carbon Fiber booms; more stable for aerial photography.
    • 13” Carbon Fiber booms; more manuverable for FPV racing and stunt flying.
    • 13" poplar wood booms.
    • No booms (compatible with 10x10mm boom material)

Weights:

  • TITAN Tri frame (no booms): 209g
  • 13" poplar wood boom set: 54g
  • 13" carbon fiber boom set: 66g
  • 13" Wood/Carbon Hybrid boom set: 90g
  • 16" carbon fiber boom set: 81g
  • 16" Wood/Carbon Hybrid boom set: 111g
  • Small Camera Mount: 65g
  • Large Camera Mount: 100g

What else you will need to get it flying? If this is your first multirotor then click here for more details.

  • Programmable 4+ channel radio and receiver
  • Flight control board such as the KK2 or MultiWii
  • 3 brushless outrunner motors and props
  • 3 ESCs
  • LiPo battery
  • Compatible yaw servo (details)
  • Servo extension wires
  • Connectors and wire for power distribution
  • A bag of 18lb (4”) mini cable-ties

 

 Product Videos

TITAN Tricopter Filght Demo
  • TITAN Tricopter Filght Demo

 Find Similar Products by Category

Shipping:
Calculated at checkout

newsletter

Connect with us

Facebook YouTube

Click the button below to add the TITAN Tricopter Frame Kit to your wish list.