Loading... Please wait...

Board Camera Mount Assembly Instructions

Board Camera Mount Assembly Instructions

 

STEP 1

Use a screwdriver to pop out any scrap plastic from the holes in the delrin.

 

STEP 2

Remove the laser masking tape from all of the delrin parts and clean with soapy water if needed.

 

STEP 3

Take one Side Plate and lay it flat on a sturdy worktable, then take the Camera Plate and align the tabs with the slots in the Side Plate as shown. Then, using a block of wood or the handle of a screwdriver; gently tap the two parts together until they are fully seated.